Industrial Oils

AAR 963 Oil

AAR 963 Oil is a high-quality lubricant specially developed for year-round lubrication of plain journal bearings in railcar journal boxes. It meets the requirements of the American Association of Railroads (AAR) Specification M-963-84 for All-Year Journal Box Lubricating Oil.
Más Información

Air Compressor Oil

Air Compressor Oil is a high-quality, non-detergent circulating oil developed primarily for use in older reciprocating air compressors. It also is recommended for use in other industrial applications where the equipment manufacturer specifies a non-detergent, ISO VG 100 mineral oil.
Más Información

Ammonia Compressor Oil

Ammonia Compressor Oil is an inhibited paraffinic circulating oil specifically developed for use in reciprocating and rotary screw compressors in industrial refrigeration systems using ammonia or carbon dioxide.
Más Información

Arbor Oil

Arbor Oil is compounded oil developed primarily for use in the lumber industry to keep edger arbor blades clean and free of pitch and resins.
Más Información

Arctic Low Pour Hydraulic Oil

Arctic Low Pour Hydraulic Oil is a high-quality, low-viscosity antiwear hydraulic oil specially developed for use in industrial and mobile equipment operating at extremely low temperatures. It has a very high viscosity index and low pour point for use in arctic conditions.
Más Información

Bearing Oil M

Bearing Oil M is a high-quality, rust and oxidation (R&O)-inhibited circulating oil specifically developed for the lubrication of backup roll bearings manufactured by Morgan Construction Company. It meets the performance requirements for "super demulsibility" as defined by Morgan's Advanced Lubricant Specification, Revision 2.4, for use in hot and cold rolling mill operations.
Más Información

Circulating Oil

Circulating Oil is a high-quality, rust-inhibited mineral oil specially developed for the lubrication of conveyor and crusher bearings in copper crushing mills.
Más Información

Compounded Gear Oil

Compounded Gear Oil is a high-quality, compounded lubricant developed for the lubrication of industrial and automotive worm gear drives operating at moderate to high temperatures, and for the lubrication of steam engine cylinders and valves.
Más Información

CP Oil

CP Oil is a low-viscosity, corrosion-preventative oil developed for the lubrication of air tools and other pneumatic equipment lubricated through air line lubricators, especially where the compressed air has high moisture content.
Más Información

Diamond Class® AW Turbine Oil

Diamond Class AW Turbine Oil is a premium quality, rust and oxidation (R&O)-inhibited, antiwear turbine oil developed for use in geared and direct-drive gas turbines and steam turbines in severe service.
Más Información

Diamond Class® Heat Transfer Fluids

Diamond Class Heat Transfer Fluids are premium quality fluids specifically developed for use in liquid-phase heat transfer systems. They are available in two different formulations, designated “O/S” for use in open systems and “C/S” for use in closed systems.
Más Información

Diamond Class® Turbine Oil

Diamond Class Turbine Oil is a premium quality, rust and oxidation (R&O)-inhibited turbine oil developed for use in gas turbines and steam turbines in severe service. It is specially formulated to protect against sludge and varnish formation in new-generation gas turbines.
Más Información

Ecoterra® HVI Hydraulic Oil

Ecoterra HVI Hydraulic Oil is a high-quality, high viscosity index, zinc-free antiwear hydraulic oil developed for use in mobile equipment operating over a wide temperature range. It is particularly recommended for use in off-road equipment manufactured by Hitachi, John Deere and others.
Más Información

Ecoterra® HVI-E Hydraulic Oil

Ecoterra HVI-E Hydraulic Oil is a high-quality, high viscosity index, zinc-free antiwear hydraulic oil developed for use in mobile equipment operating over a wide temperature range and in wet environments. It is specially formulated to emulsify readily with water to maintain effective lubrication in the presence of water.
Más Información

Ecoterra® Hydraulic Oil

Ecoterra Hydraulic Oil is a high-quality, zinc-free antiwear hydraulic oil specifically developed for use in industrial and mobile equipment operating in environmentally sensitive areas. It is specially formulated for reduced environmental impact in case of leaks or spills. It is nontoxic to fish and aquatic species as determined by OECD Test Method 203 1-12, and is classified as inherently biodegradable by the OECD Test Method 301B. It passes the visual “no sheen” requirements of the U.S. EPA Static Sheen Test.
Más Información

Ecoterra® Paper Machine Oil

Ecoterra Paper Machine Oil is a high-quality, ashless circulating oil developed for use in modern papermaking machines. It is recommended for use in paper machines manufactured by all leading OEMs. It is specially formulated to provide excellent detergency while still maintaining excellent water-separating properties. It does not contain zinc or other heavy metals, and is nontoxic to aquatic species.
Más Información

Extra Duty Gear Oil

Extra Duty Gear Oil is a premium quality, heavy-duty, extreme-pressure (EP) industrial gear oil developed for the lubrication of heavily loaded enclosed gear drives operating under moderate to severe service conditions. It is specially formulated with "clean gear" additive technology to minimize deposit formation and provide excellent gearbox cleanliness. It is recommended for use in all applications where the equipment manufacturer specifies an AGMA EP gear oil.
Más Información

Firebird AW Hydraulic Oil

Firebird AW Hydraulic Oil is an environmentally responsible antiwear hydraulic oil formulated with greater than 50% high-quality, re-refined base stocks. It has been specifically developed to lessen the environmental impact of disposal of used oil. It is recommended for use in a wide variety of industrial, mobile and marine hydraulic system applications.
Más Información

Food Machinery Oil

Food Machinery Oil is a premium quality, ashless, food-grade lubricant specially developed for use in hydraulic systems, rotary air compressors, lightly to moderately loaded enclosed gear drives and other machinery in food processing and beverage plants. It is registered by NSF International as an H1 lubricant for use where incidental food contact may occur, and also as an H2 lubricant for use in applications where there is no chance for incidental food contact. It also meets Candian Food Inspection Agency requirements for use in federally registered food plants. It is certified Kosher and Pareve.
Más Información

FR Fluid-Glycol

FR Fluid-Glycol is a water-glycol based fire-resistant hydraulic fluid developed for use in industrial hydraulic systems operating in areas subject to fire hazards. It contains sufficient water to snuff out a fire resulting from ignition of a fluid leak. It is suitable for use in hydraulic systems operating at 2,000 to 3,000 psi, and can withstand intermittent pressure spikes up to 5,000 psi.
Más Información

Gas Compressor Oil

Gas Compressor Oil is a high-quality lubricant developed for the lubrication of oil-flooded rotary compressors and for cylinder lubrication in reciprocating compressors in natural gas service. It is formulated to minimize the effects of gas dilution and oil absorption in this type of service.
Más Información

Gear Shield®

Gear Shield is a viscous, adhesive, petroleum resin/asphaltic-based gear lubricant cut back with a volatile, non-chlorinated solvent for ease of application. It is recommended primarily for the lubrication and cushioning of open and semi-enclosed gears found on stationary equipment, such as ball and rod mills, kilns and paper mills. It also may be used for the lubrication of some cable-actuated equipment, such as marine winches.
Más Información

GLW

GLW is a premium quality, extreme-pressure (EP) industrial gear oil developed for the lubrication of heavily loaded enclosed gear drives operating under severe service conditions. It is specially formulated to quickly separate from water to maintain effective lubrication in the presence of water.
Más Información

GLW-E

GLW-E is a premium quality, extreme-pressure (EP) industrial gear oil developed for the lubrication of heavily loaded enclosed gear drives operating in wet environments under severe service conditions. It is specially formulated to emulsify readily with water to maintain effective lubrication in the presence of water.
Más Información

Heat Transfer Oil

Heat Transfer Oils are high-quality straight and inhibited mineral oils developed for use in open and/or closed liquid-phase heat transfer systems. They have excellent thermal stability and provide excellent resistance to cracking and sludge formation for long service life. They are not recommended for use in vapor-phase heat transfer systems.
Más Información

High Pressure Machine Oil

High Pressure Machine Oil is a high-quality antiwear lubricating oil developed for use in the fabrication of high-strength aluminum and aluminum alloy plates and sheets, such as those used in commercial and military aircraft, the aerospace industry, and in custom industrial applications. It is specially formulated to protect against distortion and provide excellent surface finish.
Más Información

Hydraulic AW

Hydraulic AW is a general-purpose antiwear hydraulic oil developed for use in a wide range of industrial hydraulic system applications, especially in less demanding applications where premium performance is not required.
Más Información

Hydraulic Oil AW/D

Hydraulic Oil AW/D is a high-quality antiwear hydraulic oil developed for use in industrial and mobile hydraulic systems where component cleanliness is critical. It is formulated with a dispersant/detergent additive to help keep the hydraulic system clean and free of deposits.
Más Información

Industrial Oil

Industrial Oil is a highly refined, non-compounded paraffinic mineral oil recommended for use as a high-quality process oil, diluent oil, flush oil or blending component for other lubricants. It also is recommended for general-purpose lubrication in applications that do not require a compounded oil.
Más Información

Koolkut® 8052B

Koolkut 8052B is a light-colored, low viscosity, chlorine-free tri-purpose oil formulated for use as a high-performance cutting oil, gear oil and hydraulic fluid in metalworking machines.
Más Información

Koolkut® HD NC

Koolkut HD NC is a chlorine-free active cutting oil developed for medium-duty machining of cast iron, steel and high-speed steel. It is specially formulated with high quality base oils and fortified with oiliness additives and sulfur-containing extreme-pressure additives that provide excellent lubricity and antiweld properties at the chip-tool interface, resulting in extended cutting tool life and good surface finishes on the machined parts.
Más Información

Koolkut® SCF

Koolkut SCF is a heavy-duty active cutting oil developed for deep-hole drilling or gun drilling of cast iron, steel, high-speed steel and other alloys. It is specially formulated with high-quality base oils and fortified with oiliness additives and sulfur-containing extreme-pressure additives that provide reduced friction and good antiweld properties at the chip-tool interface, resulting in extended cutting tool life and good surface finishes on the machined parts.
Más Información

Koolkut® Spectrum

Koolkut Spectrum is a general-purpose cutting oil developed for medium- to heavy-duty machining of cast iron, stainless steel, high-speed steel and other alloys. It is specially formulated with high-quality base oils and fortified with sulfur-containing extreme-pressure additives that provide good antiweld properties and reduced friction at the chip-tool interface, resulting in extended tool life and good surface finishes on the machined parts.
Más Información

Koolkut® Transparent

Koolkut Transparent is a high-quality, clear, nonstaining cutting oil developed for light- to medium-duty machining of ferrous and some non-ferrous metals, such as mild steel, ductile iron and aluminum. It is transparent for good visibility of the workpiece during machining operations and is nonstaining to both ferrous and non-ferrous metals.
Más Información

Marok®

Marok is a high-quality, adhesive, extreme-pressure (EP) lubricant specifically developed to lubricate in the presence of moisture or where leakage is a problem. It is recommended for the lubrication of marine, mining and industrial equipment operating in wet environments, and for the lubrication of air-powered tools such as rock drills and jackhammers
Más Información

Megaflow® AW HVI Hydraulic Oil

Megaflow AW HVI Hydraulic Oil is a high-quality, high viscosity index antiwear hydraulic oil developed for use in industrial and mobile equipment operating in cold climates or in locations subject to wide variations in ambient temperatures. It meets the performance requirements of all major hydraulic pump manufacturers, and is recommended for use in all types of high-pressure, high-speed hydraulic pumps.
Más Información

Megaflow® AW Hydraulic Oil

Megaflow AW Hydraulic Oil is a high-quality antiwear hydraulic oil developed for use in a wide variety of industrial and mobile hydraulic system applications. It meets the performance requirements of all major hydraulic pump manufacturers, and is recommended for use in all types of high-pressure, high-speed hydraulic pumps.
Más Información

Megaflow® AW Ultra-Clean Hydraulic Oil

Megaflow AW Ultra-Clean Hydraulic Oil is a high-quality antiwear hydraulic oil developed for use in industrial and mobile hydraulic systems that require an oil with a high level of fluid cleanliness. It provides the same performance benefits as Megaflow™ AW Hydraulic Oil, plus it is filtered to a typical ISO Cleanliness Code of 17/15/11 for use in hydraulic systems with tight tolerances where particle contamination can cause operational problems.
Más Información

Milube® WR

Milube WR is a premium quality, adhesive, extreme-pressure (EP) lithium complex grease specially developed for use in demanding industrial applications such as steel rolling mills where high loads, high temperatures and/or wet conditions exist.
Más Información

Multipurpose R&O Oil

Multipurpose R&O Oil is a rust and oxidation (R&O)-inhibited, antiwear circulating oil developed for use in circulation systems, centrifugal air compressors, geared turbines, lightly loaded gearboxes and many other industrial applications. It contains a low level of ashless (zinc-free) antiwear additive for mild wear protection.
Más Información

Multi-Way Oil HD

Multi-Way Oil HD is a circulating oil developed for use in lathes and heavily loaded machine tool slideways. It is specially formulated to prevent stick-slip problems to ensure good surface finish on the machined part.
Más Información

Open Gear Lube

Open Gear Lube is a viscous, tacky, petroleum resin-based gear lubricant cut back with a volatile, non-chlorinated solvent for ease of application. It is recommended primarily for the lubrication and cushioning of open and semi-enclosed gears on mining shovels, draglines and excavation equipment used in underground and surface mines and in rock quarries.
Más Información

Paper Machine Grease

Paper Machine Grease is a premium quality, synthetic, extreme-pressure (EP) lithium complex grease specifically developed for use in paper machines. It provides outstanding bearing protection at high temperatures and in the presence of water for use in both the dry and wet ends of paper machines.
Más Información

Paper Machine Oil

Paper Machine Oil is a high-circulating oil developed for use in modern papermaking machines. It is recommended for use in paper machines manufactured by leading OEMs. It is specially formulated to provide excellent detergency while still maintaining excellent water-separating properties.
Más Información

Powerflow AW HVI Hydraulic Oil

Powerflow AW HVI Hydraulic Oil is a premium quality, high viscosity index antiwear hydraulic oil developed for use in industrial and mobile equipment operating in cold climates or in locations subject to wide variations in ambient temperatures.
Más Información

Powerflow AW Hydraulic Oil

Powerflow AW Hydraulic Oil is a premium quality antiwear hydraulic oil developed for use in a wide variety of industrial and mobile hydraulic systems operating under high-pressure, high-temperature conditions. It is formulated to provide enhanced wear protection and deposit control for severe-service applications.
Más Información

Premium Gas Compressor Oil

Premium Gas Compressor Oil is a premium quality, synthetic blend lubricant developed for use in oil-flooded rotary screw and rotary vane gas compressors, and as a cylinder lubricant and crankcase oil in reciprocating compressors in natural gas service. It is specially formulated to minimize the effects of gas dilution and oil absorption in this type of service.
Más Información

Premium Rotary Air Compressor Oil

Premium Rotary Air Compressor Oil is a premium quality, semi-synthetic lubricant developed for use in rotary air compressors operating under moderate to severe service conditions. The semi-synthetic formulation provides enhanced thermal and oxidative stability at high temperatures to minimize the formation of sludge and varnish.
Más Información

Pump Oil

Pump Oil is a highly refined paraffinic mineral oil developed for drip-feed lubrication of deep-well turbine water pumps.
Más Información

Quench Oils

Quench Oils are high-quality oils developed for heat treatment of ferrous metals in a wide variety of quenching operations. They are formulated to provide deep and uniform hardening with minimum distortion and cracking for a smooth surface finish.
Más Información

Quintolubric® 822-450

Quintolubric® 822-450 is a premium quality, synthetic, fire-resistant hydraulic fluid specifically developed for use in industrial and mobile equipment operating in areas subject to fire hazards, such as in underground mining operations, steel mills and foundries.
Más Información

Refrigerant Compressor Oil

Refrigerant Compressor Oil is a highly refined naphthenic mineral oil developed primarily for use in reciprocating and rotary screw compressors in refrigeration systems using ammonia, carbon dioxide or non-HFC refrigerants.
Más Información

Rock Drill Oil

Rock Drill Oil is an adhesive, extreme-pressure (EP) lubricant specially developed for the lubrication of air-powered tools such as rock drills, jackhammers, pavement breakers and drifters.
Más Información

Rolling Oil

Rolling Oil is a high-quality, multipurpose rolling oil developed for rolling non-ferrous metals, such as aluminum, brass, copper and copper alloys
Más Información

Soluble Oil

Soluble Oil is a chlorine-free, light-duty metalworking fluid developed to emulsify easily and form a long-lasting, stable emulsion when mixed with water.
Más Información

Soluble Oil HD

Soluble Oil HD is a chlorinated, heavy-duty metalworking fluid developed to emulsify easily and form a stable emulsion when mixed with water.
Más Información

Special Bar & Chain Oil

Special Bar & Chain Oil is an adhesive lubricant developed to lubricate the chain, bar guide and drive sprocket on chain saws used in the logging industry. It is suitable for use on all types of chain saws equipped with either hand-operated or automatic oilers.
Más Información

Spindle Wet

Spindle Wet is a highly refined paraffinic mineral oil developed to lubricate the rubber doffers on mechanical cotton picking machines.
Más Información

Steaval D-150

Steaval D-150 is a heavy, non-compounded paraffinic mineral oil developed for steam cylinder and valve lubrication in applications that require a non-emulsifying oil, or where the steam is superheated.
Más Información

Syncon® AW Hydraulic Fluid

Syncon AW Hydraulic Fluid is a premium quality, synthetic antiwear hydraulic fluid developed for use in industrial and mobile equipment operating under extreme-temperature conditions. It is particularly recommended for use in applications where operating conditions may be unfavorable or too severe for conventional mineral oil-based hydraulic oils.
Más Información

Syncon® Barrier Oil

Syncon Barrier Oil is a premium quality, non-reactive, synthetic light process oil developed for use as a barrier oil in seal applications where the manufacturer calls for a light mineral seal oil. Typical applications include seal service in refineries, gas plants, steel mills, power plants and chemical plants.
Más Información

Syncon® EP Plus Gear Oil

Syncon EP Plus Gear Oil is a premium quality, synthetic, extreme-pressure gear lubricant developed for the lubrication of enclosed industrial gear drives and heavily loaded plain or rolling-element bearings operating under extreme-temperature conditions.
Más Información

Syncon® FG Hydraulic Fluid

Syncon FG Hydraulic Fluid is a premium quality, synthetic, food-grade antiwear hydraulic fluid developed for use in the hydraulic systems of machinery found in food processing and packaging plants and in beverage bottling plants, where incidental food contact may occur.
Más Información

Syncon® Mist Oil

Syncon Mist Oil is a premium quality, synthetic, extreme-pressure gear oil developed for use in oil mist lubrication systems for enclosed industrial gearboxes operating under extreme temperature conditions.
Más Información

Syncon® Premium EP Gear Oil

Syncon Premium EP Gear Oil is a premium quality, synthetic, extreme-pressure gear lubricant specifically recommended for lubricating the heavily loaded gears and rolling-element bearings in motorized wheel gearboxes found on mining haul trucks.
Más Información

Syncon® R&O Oil

Syncon R&O Oil is a multipurpose, synthetic circulating oil developed for use in a wide variety of industrial applications. The lighter viscosity grades (ISO 32, 46, 68 and 100) typically are recommended for use in rotary air compressors, circulating pumps, vacuum pumps and electric motor bearings operating under severe-service conditions or at extreme temperatures.
Más Información

Syncon® Refrigeration Oil

Syncon Refrigeration Oil is a premium quality, synthetic lubricant developed for use in rotary screw compressors in refrigeration service compressing ammonia, methyl chloride or carbon dioxide.
Más Información

Syncon® Turbine Oil

Syncon Turbine Oil is a premium quality synthetic lubricant developed for use in land-based gas turbines operating over a wide temperature range, where the manufacturer calls for a synthetic hydrocarbon or PAO-based turbine oil.
Más Información

Syncon® WTL

Syncon WTL is a state-of-the-art, synthetic, extreme-pressure (EP) gear lubricant specifically developed for lubricating the heavily loaded gears and rolling-element bearings in gearboxes of older and new-generation wind turbine generators.
Más Información

Syndustrial® FR Hydraulic Fluid

Syndustrial FR Hydraulic Fluid is a premium quality, synthetic, fire-resistant hydraulic fluid specifically developed for use in industrial equipment operating in areas subject to fire hazards, such as in steel mills, surface mines and foundrie.
Más Información

Syndustrial® PAG Compressor Oil

Syndustrial PAG Compressor Oil is a premium quality, synthetic lubricant developed for use in centrifugal and oil-flooded rotary screw and rotary vane compressors processing natural gas, carbon dioxide, propane or other hydrocarbon gases
Más Información

DEXRON®-VI ATF

DEXRON®-VI ATF is a next-generation, full-synthetic transmission fluid approved for use in passenger car and light truck automatic transmissions that require a GM DEXRON®-VI or earlier generation DEXRON® fluid.
Más Información

MERCON®V ATF

MERCON®V ATF is a premium quality, part-synthetic transmission fluid approved for use in passenger car and light truck automatic transmissions that require a Ford MERCON®V fluid.
Más Información

PowerDrive® Fluid

Conoco® PowerDrive Fluid is a high-performance multifunctional fluid developed for use in transmissions, final drives and hydraulic systems of off-highway equipment where a fluid meeting Caterpillar TO-4 performance requirements is specified.
Más Información

PowerDrive® Synthetic All Season TO-4 Fluid

PowerDrive Synthetic All Season TO-4 Fluid is a premium quality, synthetic, multifunctional fluid developed for use in transmissions, final drives and hydraulic systems of off-highway equipment where a fluid meeting Caterpillar TO-4 performance requirements is specified.
Más Información

PowerTran™ Fluid

Conoco® PowerTran Fluid is a multifunctional fluid specially formulated for use in farm tractors and other off-highway equipment requiring one lubricant for the transmission, final drive, wet brakes and hydraulic systems.
Más Información

Super ATF

Super ATF is a high-quality transmission fluid recommended for use in all domestic and import vehicles no longer under warranty where the OEM previously specified a GM DEXRON®-III H or Ford MERCON® fluid.
Más Información

Syncon® High Performance ATF

Conoco® Syncon High Performance ATF is a full-synthetic, heavy-duty automatic transmission fluid designed for use in truck and bus transmissions operating under severe service conditions or in extended drain intervals.
Más Información

Triton® Synthetic Transoil 50

Triton Synthetic Transoil 50 is a full-synthetic SAE 50 transmission lubricant designed for use in heavy-duty manual transmissions in trucks and buses operating in extreme temperatures and/or extended service intervals.
Más Información

Type F ATF

Type F ATF is specifically designed for use in automatic transmissions in passenger cars and light trucks manufactured by Ford Motor Company prior to 1977, and in many 1977-1981 models.
Más Información

VersaTrans® ATF

VersaTrans ATF is a premium quality, part-synthetic transmission fluid specially designed for use in automatic transmissions in most passenger cars and light trucks.
Más Información